Вашата нарачка ( 1 од 4)

Нарачај

Прегледај нарачка

Плати

Отпечати фактура

Количина: Пар.

Бренд: Powertech

Категорија: DiSEqC мотори

Залиха: Има

Рејтинг: 1 2 3 4 5

Начини на испорака Гаранција

0.00 ден.

0.00 еур.

Нарачај

DiSEqC мотор Powertech DG-380


With a motorized system the dish moves from east to west to track the satellites positioned along the Clarke belt.  Good for any offset dish with a U-bolt. It utilizes a data stream passed up the LNB co-axial lead to the mount. Only one co-axial cable is needed for installation.
 
Note: This motor comes with a 55mm (2.16") shaft to fit dishes with U-Bolts. If your dish has a Pole mount bracket with 42mm (1 5/8") diameter, then you will need to order the 42mm shaft below.
 
Features
  • Special design for any receiver with DiSEqC 1.2 & USALS control
  • Does NOT require a receiver with built-in Positioner.
  • Only one coaxial cable control
  • Go to X function
  • High efficiency
  • Compact structure
  • Ultra low noise
  • Metal Main Gear
  • Adjustable hardware limits
  • Easy installation with LED Indicator
  • Manual EAST / WEST buttons
  • Mounts on Pole Size up to 2.5"
  • Shaft Size: 2.16" (55mm) shaft diameter to fit large dishes with U-Bolts
  • Optional Shaft Size:  1 5/8" (42mm) Shaft to Fit smaller dishes with Pole-Bolt brackets.
  • Metal Mounts & Gears Box Inside
  • Automatic Zero Backlash (Slack) Adjustment
  • For up to 120 cm Steel dish (Max 31lbs).
  • Heavy duty construction & precise technology.
  • 0.1 degree precision resolution
  • +/- 80° Azimuth Rotation angle. 
  • 55MM (2.16") Shaft
  • DiSEqC 1.2, 1.3,  USALS or "Goto X"
  • Stainless Steel U-Bolt mounting screws
  • Software Limit Protection

Нарачај